Anwsers

Test 1
1: B) computer-aided drafting and design.
2: A) computer-aided design.
3: C) 1993
4: D) 300 MB.
5: D) 2004
6: A) 2D mechanical engineering, design, and drafting.
7: B) the mechanical and electrical design of industrial machinery.
8: C) stone tablets.
9: A) technical drawings.
10: D) drawn to an exact set of rules using specific techniques
______________________________________________________________
Test 2
1: B) American Society of Mechanical Engineers.
2: C) A to E.
3: C) A0 to A4.
4: A) 8.50 × 11 inches.
5: B) revision block
6: D) Engineering Change Order.
7: A) Engineering Change Notice
8: B) ASME.
9: C) board drafter
10: D) title block.
______________________________________________________________
Test 3
1: C) DSETTINGS
2: A) snap
3: C) picking the SNAP button on the status bar
4: B) grid.
5: B) snap to certain key points on existing geometry
6: D) polar tracking.
7: A) Endpoint object snap
8: B) Center object snap
9: A) press the F10 key
10: D) running object snap
______________________________________________________________
Test 4
1: B) multiview drawing
2: A) orthogonal views
3: C) orthographic projection
4: D) normal view
5: C) third-angle projection
6: A) phantom lines
7: B) six principal views
8: C) dimentioning
9: A) hidden lines
10: B) front view
______________________________________________________________
Test 5

1. B) blind holes.

2. A) clearance.

3. C) clearance hole.

4. A)

5. D) 118°.

6. B)

7. C)

8. C) 82°.

9. A) flat-head screw.

10. B) Ø
______________________________________________________________
Test 6
1. D) tolerance.
2. B) four times.
3. C) tolerance zone.
4. A) unilateral.
5. C) deviation tolerance.
6. B) limits.
7. D) $16.00.
8. A) interference fit.
9. C) clearance fit.
10. B) interference fit.
______________________________________________________________
Test 7
1. A) location of a feature.
2. C) ASME.
3. B) in a feature control frame.
4. D) datum.
5. B) is made at the smallest allowable size.
6. A)
7. C)
8. D)
9. B)
10. A)